Loading ...
Loading ...
Loading ...
||
INSTRUMENTS AND CONTROLS
* Option/accessory.
132
Thumbwheel in the instrument panel
Thumbwheel for adjusting interior brightness
Thumbwheel for headlamp levelling
A car with LED
22
headlamps* has automatic
headlamp levelling and therefore does not have
the thumbwheel for headlamp levelling.
Adjusting the interior brightness
The lamps inside the car come on differently
depending on the ignition position used.
The thumbwheel adjusts the brightness of display
lighting, control lighting, ambient light and ambi-
ence light*.
Headlamp levelling
The load in the car changes the vertical align-
ment of the headlamp beam, which could dazzle
oncoming motorists. Avoid this by adjusting the
height of the beam. Lower the beam if the car is
heavily laden.
For different load cases and settings, see the
section "Headlamp levelling".
Related information
•
Passenger compartment lighting (p. 141)
•
Activating/deactivating main beam (p. 135)
•
Ignition positions (p. 403)
•
Position lamps (p. 133)
•
Headlamp levelling (p. 132)
Headlamp levelling
Headlamp levelling
23
is adjusted using one of
the thumbwheels in the instrument panel.
1. Leave the engine running, or have the car's
electrical system in ignition position I.
2. Roll the thumbwheel up/down to raise/lower
beam alignment.
The position in which the thumbwheel should be
set for a number of load cases is shown below.
Examples of thumbwheel position.
Thumbwheel in position 0
Thumbwheel in position 1
22
LED (Light Emitting Diode)
Loading ...
Loading ...
Loading ...