Loading ...
Loading ...
Loading ...
INSTRUMENTS AND CONTROLS
}}
149
NOTE
One way to reduce the pulsating wind noise
when the rear windows are open is to also
open the front windows slightly.
NOTE
The windows cannot be opened at speeds
above approx. 180 km/h (approx. 112 mph),
but they can be closed.
Operating without auto
Move one of the controls up/down gently. The
power windows move up/down as long as the
control is held in position.
Operating with auto
Move one of the controls up/down to the end
position and release it. The window runs auto-
matically to its end position.
Operating with the remote control key, door
handle or central locking button
To operate the power windows with the remote
control key, door handles on the outside, or from
the inside with the central locking button, see the
section "Remote control key", "Locking/unlock-
ing from the outside" or "Locking/unlocking from
the inside".
Pinch protection
Closing of the windows is stopped and the win-
dow is opened if anything prevents its movement.
It is possible to override the pinch protection
when closing has been interrupted, e.g. if ice has
formed on the window. After two successive clos-
ing interruptions the pinch protection will be over-
ridden and the automatic function deactivated for
a short while, now it is possible to close by hold-
ing the button in its raised position.
Resetting
If the starter battery is disconnected then the
function for automatic opening must be reset so
that it can work correctly.
1. Gently raise the front section of the button to
raise the window to its end position and hold
it there for one second.
2. Release the button briefly.
3. Raise the front section of the button again
for one second.
WARNING
A reset must take place for pinch protection
to work.
Related information
•
Power windows (p. 148)
•
Child safety locks (p. 256)
•
Ignition positions (p. 403)
•
Remote control key (p. 230)
•
Locking/unlocking from the outside (p. 235)
•
Locking/unlocking from the inside (p. 239)
Adjusting the door mirrors
The door mirror positions are adjusted with the
joystick in the driver's door control panel.
Controls for door mirrors.
Adjusting
1.
Press the L button for the left-hand door mir-
ror or the R button for the right-hand door
mirror. The light in the button illuminates.
2. Adjust the position with the joystick in the
centre.
3.
Press the L or R button again. The light
should no longer be illuminated.
WARNING
Both mirrors are bent to provide optimal
vision. Objects may appear further away than
they actually are.
Loading ...
Loading ...
Loading ...