Loading ...
Loading ...
Loading ...
INSTRUMENTS AND CONTROLS
}}
* Option/accessory.
159
ble buttons and one indicator lamp in the mirror
glass.
For more information about HomeLink
®
, visit
www.HomeLink.com, www.youtube.com/
HomeLinkGentex or call the toll-free number
00 8000 466 354 65 (or the toll number
+49 6838 907 277).
WARNING
•
If HomeLink
®
is used to control a garage
door or gate, ensure that nobody is near
the door or gate while it is in motion.
•
While programming HomeLink, the
garage door or gate being programmed
may activate. For this reason, make sure
that nobody is in the vicinity of the door or
gate while programming is in progress.
•
The car should be outside the garage
while a garage door opener is being pro-
grammed.
•
Do not use HomeLink
®
for any garage
door that does not have safety stop and
safety reverse.
Save the original remote controls for future pro-
gramming (e.g. when changing to another car or
for use in another vehicle). It is also recom-
mended that the programming for the buttons is
deleted when the car is sold; see the section
"Programming HomeLink
®
".
Related information
•
Programming HomeLink
®
* (p. 159)
Programming HomeLink
®
*
34
Instructions for programming HomeLink
®
.
Programming HomeLink
®
NOTE
In certain vehicles the ignition must be
switched on or in "accessory position" before
HomeLink
®
can be programmed or used.
Preferably fit new batteries in the remote con-
trol that will be replaced by HomeLink
®
for
faster programming and improved transmis-
sion of the radio signal. The HomeLink
®
but-
tons should be reset before programming,
see the heading "Resetting the HomeLink
®
buttons". When the reset is complete,
HomeLink
®
is set in "learn mode" and ready
for programming.
1.
Press the button
35
on HomeLink
®
you want
to program. The indicator lamp
35
on
HomeLink
®
should flash yellow once per
second. It is not necessary to hold the button
depressed.
32
Applies to certain markets.
33
HomeLink and the HomeLink house symbol are registered trademarks of Gentex Corporation.
Loading ...
Loading ...
Loading ...