Loading ...
Loading ...
Loading ...
DRIVER SUPPORT
}}
395
NOTE
The distance between the car and parking
spaces should be 0.5-1.5 metres (1.6-5.0 ft)
while PAP is searching for a parking space.
Parking
PAP parks the car using the following steps:
1. A parking space is identified and measured.
2. The car is reversed into the space.
3. The car is positioned into the space - the
system may then request that the driver
changes gear.
Finding and measuring parking spaces
The function can be activated
in the centre display's function
view.
It can also be accessed from
the camera views.
Principle for parallel parking.
Principle for perpendicular parking.
Proceed as follows:
1. Drive no faster than 30 km/h (20 mph) for
parallel parking or 20 km/h (12 mph) for
perpendicular parking.
2.
Tap on the
Park In button in function view.
> PAP searches for a parking space and
checks whether it is big enough.
3. Be prepared to stop the car when the
graphic and message on the centre display
state that a suitable parking space has been
found.
> A pop-up window is shown.
4.
Select
Parallel parking or Perpendicular
parking and select reverse gear.
NOTE
PAP searches the area for parking, displays
instructions and guides the car in on its pas-
senger side. But if required the car can also
be parked on the driver's side of the street:
•
Activate the direction indicator to the
driver's side - then the system searches
for a parking space on that side of the
car instead.
95
Park Assist Pilot
Loading ...
Loading ...
Loading ...