Loading ...
Loading ...
Loading ...
||
INSTRUMENTS AND CONTROLS
146
switch must be in position 0 or in the position for
a single sweep.
Activate the rain sensor by pressing the rain sen-
sor button
.
Press the stalk switch down for the wipers to
make an extra sweep.
Turn the thumbwheel upward for higher sensitiv-
ity and downward for lower sensitivity. An extra
sweep is made when the thumbwheel is turned
upward.
Deactivating the rain sensor
Deactivate the rain sensor by pressing the rain
sensor button
or moving the stalk switch
up to another wiper program.
The rain sensor is deactivated automatically in
ignition position 0 or when the engine is
switched off.
The rain sensor is deactivated automatically when
wiper blades are set in service position. The rain
sensor is reactivated when service position has
been deactivated.
IMPORTANT
The windscreen wipers could start and be
damaged in an automatic car wash. Deacti-
vate the rain sensor while the car is running
or when the car's electrical system is in igni-
tion position I or II. The symbol in the driver
display extinguishes.
Activating/deactivating the memory
function
The memory function for the rain sensor can be
activated in such a way that the rain sensor but-
ton does not need to be depressed each time the
car is started:
1.
Press
Settings in the top view in the centre
display.
2.
Press
My Car Wipers.
3.
Select
Rain Sensor Memory to activate/
deactivate the memory function.
Related information
•
Using windscreen wipers (p. 145)
•
Wiper blades in service position (p. 547)
•
Rear window wiper and washer (p. 147)
Windscreen and headlamp washers
Windscreen and headlamp washers clean the
windscreen and headlamps. Washing/wiping is
started by means of the right-hand stalk switch.
Starting windscreen and headlamp
washers
Washing function, right-hand stalk switch.
–
Move the right-hand stalk switch toward the
steering wheel to start the windscreen and
headlamp washers.
> The windscreen wipers will make several
more sweeps once the stalk switch has
been released.
IMPORTANT
Avoid activating the washer system when it is
frozen or the washer reservoir is empty, other-
wise there is a risk of damaging the pump.
Loading ...
Loading ...
Loading ...