Loading ...
Loading ...
Loading ...
LOADING AND STORAGE
* Option/accessory.
225
4. Rear fitting: With the net fitted in the rear
roof mountings, hook the safety net's anchor-
ing straps into the front floor eyes in the
cargo area.
Rear fitting.
Front fitting: With the net fitted in the front
roof mountings, hook the anchoring straps
into the outer eyes on the rear of the seat
slide rails - it is easier if the backrests are
straightened and the seats are moved for-
ward slightly.
Front fitting.
Pay attention to make sure that you do not
press the seat/backrest hard against the net
when the seat/backrest is moved back again
- only adjust until the seat/backrest makes
contact with the net.
5. Tension the safety net with the anchoring
straps.
IMPORTANT
If the seat/backrest is pressed hard back-
wards against the safety net then the net
and/or its roof mountings could be damaged.
Removing and storing
The safety net can be easily removed and folded
up.
1. Reduce safety net tension by pressing the
button in the anchoring strap lock and feed-
ing out a little of the anchoring strap on each
side.
2. Press in the catches and detach both of the
anchoring strap's hooks.
3. Undo the upper attachments and release the
net from the roof mountings.
4. Press the red button on the rod to enable
folding and then roll up the net.
Related information
•
Recommendations for loading (p. 219)
•
Cargo cover* (p. 222)
•
Load retaining eyelets (p. 221)
Loading ...
Loading ...
Loading ...