Loading ...
Loading ...
Loading ...
STARTING AND DRIVING
}}
* Option/accessory.
415
With automatic gearbox
•
Stop the car with the foot brake and then
keep your foot on the brake pedal - the
engine stops automatically.
With manual gearbox
•
Declutch, set the gear lever in neutral posi-
tion and release the clutch pedal - the
engine stops automatically.
In drive mode
Eco or Comfort
3
, the engine may
auto-stop before the car is completely stationary.
With the
Adaptive cruise or Pilot Assist func-
tion activated, the engine will autostop after
approximately three seconds.
See the section "Conditions for Start/Stop func-
tion".
Autostart
The following is required for the engine to auto-
start:
With automatic gearbox
•
Release the brake pedal - the engine will
autostart and you can continue driving. On an
uphill gradient hill start assist (HSA)
engages, which prevents the car from rolling
backwards.
•
When the
Auto hold function is activated,
auto-start is delayed until the accelerator
pedal is depressed.
•
When the
Adaptive cruise or Pilot Assist
function are activated, the engine will autos-
tart when the accelerator pedal is depressed,
or by pressing the
button on the left
keypad of the steering wheel.
•
Maintain foot pressure on the brake pedal
and depress the accelerator pedal - the
engine auto-starts.
•
On a downhill gradient: Release pressure on
the brake pedal slightly so that the car
begins to roll - the engine will auto-start after
a slight speed increase.
With manual gearbox
•
With the gear lever in neutral position:
Depress the clutch pedal or depress the
accelerator pedal - the engine starts.
•
On a downhill gradient: Release pressure on
the brake pedal slightly so that the car
begins to roll - the engine will auto-start after
a slight speed increase.
Symbols in the driver display
With 12-inch driver display*
•
The text
READY is shown in the tachometer
when the function is available.
•
A pointer in the tachometer points to
READY when the function is active and the
engine is auto-stopped.
•
The text
READY is greyed out when the
function is not available.
•
No text is shown when the function is deacti-
vated.
The function is active and the engine is auto-stopped.
3
Normal start mode.
Loading ...
Loading ...
Loading ...