Loading ...
Loading ...
Loading ...
Main menu Information/Function
"Mobility info" Range with available fuel.
"Precondit.
setting"
With parked-car heating: oper‐
ate parked-car heating.
Without parked-car heating:
operate parked-car ventilation.
Stationary climate control
through Remote Engine Start.
Display key battery
General information
Follow the following information:
▷ If the charge state of the display key battery
declines, the display is switched off automati‐
cally. The battery must be recharged so that
the display can be switched back on. The op‐
erability of the standard buttons is retained
until the battery is completely discharged.
▷ Charge the battery for at least three hours
before using the display key for the first time
or if the key has not been used for an ex‐
tended period.
▷ The display key can be used while it is being
charged via the USB port. If the battery is fully
discharged, it may take some time before the
display key can be used again.
▷ Due to the large number of USB chargers
available on the market, it cannot be guaran‐
teed that every charger will function properly.
The charging duration depends on the
charger used.
▷ Charging via the USB port may heat up the
charger and the display key.
Charging in the wireless charging tray may
heat up the tray and the display key.
At higher temperatures, the charge current
through the display key may be reduced, and
in isolated cases the charge process may be
interrupted temporarily.
▷ When inserting the display key into the wire‐
less charging tray, make sure there are no
objects between it and the wireless charging
tray.
Safety information
Warning
When charging a device that meets the Qi
standard in the wireless charging tray, any
metal objects located between the device and
the tray can become very hot. If smart cards,
memory cards or cards with magnetic strips are
placed between the device and the tray, this
may impair card function. There is a risk of in‐
jury and risk of damage to property. When
charging mobile devices, make sure there are
no objects between the device and the tray.
Charging
Via USB
Connect the display key via the micro-USB
charging socket to a USB port.
With thermoelectric cup holder: centered
in the center console
1.
Open the tray cover.
2. Place display key flush into the recess of the
wireless charging tray.
Ensure that the display is facing up.
3. Close the tray cover.
Seite 91
Opening and closing
CONTROLS
91
Online Edition for Part no. 01402667211 - VI/19
Loading ...
Loading ...
Loading ...