Loading ...
Loading ...
Loading ...
Sockets
Concept
The lighter socket can be used as a socket for
electrical equipment when standby and drive-
ready state are switched on.
General information
The total load of all sockets must not exceed
140 watts at 12 volts.
Do not damage the socket by using non-com‐
patible connectors.
Safety information
Warning
Devices and cables in the unfolding area of the
airbags, such as portable navigation devices,
can hinder the unfolding of the airbag or be
thrown around in the car's interior during un‐
folding. There is a risk of injury. Make sure that
devices and cables are not in the airbag's area
of unfolding.
NOTICE
Battery chargers for the vehicle battery can
work with high voltages and currents, which
means that the 12 volt on-board network can
be overloaded or damaged. There is a risk of
damage to property. Only connect battery
chargers for the vehicle battery to the starting
aid terminals in the engine compartment.
NOTICE
If metal objects fall into the socket, they can
cause a short circuit. There is a risk of damage
to property. Replace the cigarette lighter or
socket cover again after using the socket.
Front center console
Press onto the cover.
A socket is located between the cup holders in
one of the marked positions.
Pull off the cover.
Rear center console
A socket is located in the center console.
Pull off the cover.
Seite 293
Interior equipment
CONTROLS
293
Online Edition for Part no. 01402667211 - VI/19
Loading ...
Loading ...
Loading ...