Loading ...
Loading ...
Loading ...
intervention at the steering wheel, an acoustic
warning will sound. A short warning signal will
sound at the second steering intervention. Be‐
ginning with the third steering intervention, an
continuous warning will sound.
In addition, a Check Control message is dis‐
played.
The warning signal and Check-Control message
are an encouragement to pay closer attention to
the lane.
With trailer towing
If the trailer power socket is in use or trailer tow‐
ing is activated, for instance during operation
with trailer or bicycle rack, no steering interven‐
tion takes place.
End of warning
The warning is canceled in the following situa‐
tions:
▷ Automatically after approx. 3 seconds.
▷ When returning to your own lane.
▷ When braking hard.
▷ When using the turn signal.
▷ If DSC Dynamic Stability Control intervenes.
System limits
Safety information
Warning
The system is designed to operate in certain
conditions and circumstances. Due to condi‐
tions or other factors, the system may not re‐
spond. There may be a risk of accident or risk
of damage to property. Actively intervene as
warranted. Refer to the information in this Own‐
er’s Manual regarding the scope of the sys‐
tem’s operation and limitations.
Functional limitations
The system may not be fully functional in the fol‐
lowing situations:
▷ In heavy fog, wet conditions, or snowfall.
▷ In the event of missing, worn, poorly visible,
merging, diverging, or multiple lane markings
such as in construction areas.
▷ When lane markings are covered in snow, ice,
dirt or water.
▷ In tight curves or on narrow lanes.
▷ When lane markings are covered by objects.
▷ When driving very close to the vehicle in front
of you.
▷ If there are constant blinding effects because
of oncoming light, for instance from the sun
low in the sky.
▷ If the field of view of the camera or the wind‐
shield is dirty or covered in the area of the in‐
terior mirror.
▷ If the camera has overheated and been tem‐
porarily switched off due to excessively high
temperatures.
▷ Up to 10 seconds after the start of the engine
via the Start/Stop button.
▷ During calibration of the camera immediately
after vehicle delivery.
A Check Control message may be displayed
when the system is not fully functional.
Blind spot collision warning
Concept
Blind spot collision warning detects vehicles in
the blind spot or vehicles approaching from be‐
hind in the adjacent lane. A warning is issued in
various gradations in these situations.
Seite 197
Safety
CONTROLS
197
Online Edition for Part no. 01402667211 - VI/19
Loading ...
Loading ...
Loading ...