Loading ...
Loading ...
Loading ...
Detection range
The system's detection potential is limited.
Only objects that are detected by the system are
taken into account.
Thus, a system reaction might not come or
might come late.
The following situations may not be detected, for
example:
▷ Slow moving vehicles when you approach
them at high speed.
▷ Vehicles that suddenly swerve in front of you,
or sharply decelerating vehicles.
▷ Vehicles with an unusual rear appearance.
▷ Two-wheeled vehicles ahead of you.
Functional limitations
The system may not be fully functional in the fol‐
lowing situations:
▷ In heavy fog, wet conditions, or snowfall.
▷ In tight curves.
▷ If the driving stability control systems are lim‐
ited or deactivated, for instance DSC OFF.
▷ If the field of view of the camera or the wind‐
shield is dirty or covered in the area of the in‐
terior mirror.
▷ If the camera has overheated and been tem‐
porarily switched off due to excessively high
temperatures.
▷ Depending on the equipment: if the radar
sensors are dirty or covered.
▷ After improperly performed work on the vehi‐
cle paint in the area of the radar sensors.
▷ Up to 10 seconds after the start of the engine
via the Start/Stop button.
▷ During calibration of the camera immediately
after vehicle delivery.
▷ If there are constant blinding effects because
of oncoming light, for instance from the sun
low in the sky.
Intersection collision
warning
Concept
The system may prevent some accidents with
cross traffic at intersections and junctions. In the
event of an accident, the system may reduce im‐
pact speed.
The system sounds a warning in the city speed
range before an imminent collision and activates
brakes independently, if needed.
General information
The system is controlled by the following sen‐
sors:
▷ Camera in the area of the interior mirror.
▷ Radar sensors on the side in the front
bumper.
▷ Radar sensor in the center in the front
bumper
At intersections and junctions, a warning is is‐
sued when a danger of collision with crossing
traffic is detected.
The system issues a two-phase warning of a
possible risk of collision with vehicles at speeds
above approx. 6 mph/10 km/h. The timing of
warnings may vary with the current driving situa‐
tion.
The Driver Attention Camera in the instrument
cluster captures the driver’s field of vision. Addi‐
tionally, the system checks for visual impair‐
ments. Field of vision and visibility also affect the
timing of the warnings.
Seite 183
Safety
CONTROLS
183
Online Edition for Part no. 01402667211 - VI/19
Loading ...
Loading ...
Loading ...