Loading ...
Loading ...
Loading ...
Vehicles with side collision
mitigation: switching steering
intervention on/off
The steering intervention can be switched on
and off separately for blind spot collision warning
and lane departure warning.
Via iDrive:
1. "CAR"
2. "Settings"
3. "Driver Assistance"
4. "Safety and warnings"
5. "Blind spot collision warning"
6. "Steering intervention"
The setting is stored for the driver profile cur‐
rently used.
Warning function
Light in the exterior mirror
Prewarning
The dimmed light in the exterior mirror indicates
when there are vehicles in the blind spot or ap‐
proaching from behind.
Acute warning
If the turn signal is switched on while a vehicle is
in the critical zone, the steering wheel vibrates
briefly and the light in the exterior mirror flashes
brightly.
The warning stops when the other vehicle has
left the critical area or after deactivation of the
turn signal.
Vehicles with side collision
mitigation
If there is no response to the vibration of the
steering wheel at speeds of up to
130 mph/210 km/h and the lane marking is
crossed, the system intervenes with a brief active
steering intervention. The steering intervention
helps return the vehicle into the lane. The steer‐
ing intervention can be noticed on the steering
wheel and can be manually overridden at any
time.
Flashing of the light
A flashing of the light during vehicle unlocking
serves as system self-test.
System limits
Safety information
Warning
The system is designed to operate in certain
conditions and circumstances. Due to condi‐
tions or other factors, the system may not re‐
spond. There may be a risk of accident or risk
of damage to property. Actively intervene as
warranted. Refer to the information in this Own‐
er’s Manual regarding the scope of the sys‐
tem’s operation and limitations.
Upper speed limit
If the vehicle speed exceeds approx.
155 mph/250 km/h, the system is deactivated
temporarily.
If the vehicle speed falls below approx.
155 mph/250 km/h, the system once again re‐
sponds according to the setting.
Functional limitations
The system may not be fully functional in the fol‐
lowing situations:
Seite 200
CONTROLS
Safety
200
Online Edition for Part no. 01402667211 - VI/19
Loading ...
Loading ...
Loading ...