Loading ...
Loading ...
Loading ...
1. Close all doors.
2. Push the switch forward past the resistance
point and hold.
The glass sunroof closes with limited jam
protection. If the closing force exceeds a spe‐
cific threshold, closing is interrupted.
3. Push the switch forward again past the resist‐
ance point and hold until the glass sunroof
closes without jam protection. Make sure that
the closing area is clear.
Closing from the lifted position
without jam protection
In the event of danger, proceed as follows:
1.
Close all doors.
2. Push the switch forward past the resistance
point and hold.
The glass sunroof closes without jam protection.
Initializing after a power
interruption
General information
After a power failure during the opening or clos‐
ing process, the glass sunroof can only be oper‐
ated to a limited extent.
The system can be initialized under the following
conditions.
▷ The vehicle is parked in a horizontal position.
▷ The drive-ready state is established.
▷ The external temperature is above
41 ℉/5 ℃.
During initialization, the glass sunroof closes
without jam protection.
Make sure that the closing area is clear.
Initializing the system
Press the switch up and hold it
until the initialization is complete:
Initialization begins within 15 seconds.
▷ If the glass sunroof is closed, it opens then
closes again.
▷ If the glass sunroof is open, it first closes,
then opens and closes again.
Initialization is complete once the glass sunroof
and sun protection have opened then closed
again.
Seite 112
CONTROLS
Opening and closing
112
Online Edition for Part no. 01402667211 - VI/19
Loading ...
Loading ...
Loading ...