Loading ...
Loading ...
Loading ...
To open the embedded web server through Wi-Fi Direct
1. From the printer control panel, touch or swipe down the tab at the top of the screen to open the
Dashboard, and then touch (Wi-Fi Direct).
2. Touch ( Settings ).
3. If the display shows that Wi-Fi Direct is O , touch Wi-Fi Direct and then switch it on.
4. From your wireless computer, turn wireless on, search for and connect to the Wi-Fi Direct name, for
example: DIRECT-**-HP OiceJet Pro 9010 (where ** are the unique characters to identify your printer).
5. Enter the Wi-Fi Direct password when prompted.
6. In a supported web browser on your computer, type the following address: http://
192.168.223.1
.
Embedded web server cannot be opened
Check your network setup
● Make sure you are not using a phone cord or a crossover cable to connect the printer to the network.
● Make sure the network cable is securely connected to the printer.
● Make sure the network hub, switch, or router is turned on and working correctly.
Check the computer
● Make sure the computer that you are using is connected to the same network as the printer.
Check your web browser
● Make sure the web browser meets the minimum system requirements.
● If your web browser uses any proxy settings to connect to the Internet, try turning o these settings. For
more information, see the documentation available with your web browser.
● Make sure JavaScript and cookies are enabled in your web browser. For more information, see the
documentation available with your web browser.
Check the printer IP address
● Make sure the printer IP address is correct.
To nd out the printer IP address, from the printer control panel, touch or swipe down the tab at the top
of the screen to open the Dashboard, touch (Wireless) or (Ethernet).
To obtain the printer IP address by printing a network conguration page, from the printer control panel,
touch or swipe down the tab at the top of the screen to open the Dashboard, touch ( Setup ), touch
Reports , and then touch Network Conguration Page.
● Make sure the printer IP address is valid. The printer IP address should have the similar format as the
router IP address. For example, the router IP address might be 192.168.0.1 or 10.0.0.1 and the printer IP
address is 192.168.0.5 or 10.0.0.5.
If the printer IP address is similar to 169.254.XXX.XXX or 0.0.0.0, it is not connected to the network.
ENWW Embedded web server 145
Loading ...
Loading ...
Loading ...