Loading ...
Loading ...
Loading ...
Set up the printer for wireless communication
This section contains the following topics:
●
Before you begin
●
Set up the printer on your wireless network
●
Connect your printer by using the HP Smart app
●
Change the connection type
●
Test the wireless connection
●
Turn on or o the wireless capability of the printer
NOTE: If you encounter problems connecting the printer, see Network and connection issues.
TIP: For more information about setting up and using the printer wirelessly, visit the HP Wireless Printing
Center ( www.hp.com/go/wirelessprinting ).
Before you begin
Ensure the following before you begin setting up the printer for wireless communication:
● The printer is not connected to the network using an Ethernet cable.
● The wireless network is set up and working properly.
● The printer and the computers that use the printer are on the same network (subnet).
NOTE: While connecting the printer, you might be prompted to enter the wireless network name (SSID) and
a wireless password.
● The wireless network name is the name of your wireless network.
● The wireless password prevents other people from connecting to your wireless network without your
permission. Depending on the level of security required, your wireless network might use either a WPA
passphrase or WEP key.
If you have not changed the network name or the security passkey since setting up your wireless network,
you can sometimes nd them on the back or side of the wireless router.
If you cannot nd the network name or the security password or cannot remember this information, see the
documentation provided with your computer or with the wireless router. If you still cannot nd this
information, contact your network administrator or the person who set up the wireless network.
Set up the printer on your wireless network
Use the Wireless Setup Wizard or Wi-Fi Protected Setup from the printer control panel display to set up
wireless communication.
ENWW Set up the printer for wireless communication 133
Loading ...
Loading ...
Loading ...