XNX UNIVERSAL XNX Universal Transmitter Technical Manual

Loading ...

XNX Universal Transmitter

Section 2 - Installation and Operation

Figure 76. Current congured mV sensor and mV Available Sensor List

Therstscreendisplaysthecurrentlyconguredsensor.Select

✓

to navigate to the Sensor Selection screen. To select a new

mV sensor, use the

switches to scroll through the list. Use

✓

to select a sensor or

✖

to discard the sensor selection, retaining

the previously selected sensor, and return to the previous menu.

Set mA Sensor Type

Figure 77. Set mA Sensor Type Screen

SetmASensorTypeidentiesthetypeofmAsensorattached

tothetransmitter.TheavailablemAsensorchoicesare“Excel/

Optima” and “Other mA Sensor.”

Figure 78. mA Available Sensor List

To select a new mA sensor, use the switches to move

through the list. Use

✓

to make the selection or

✖

to discard the

selection, retain the previously selected sensor, and return to the

previous menu.

Note: This configuration option is not available for XNX transmitters

with EC sensors.

Gas Selection

Gas Selection sets the target gas for sensors capable of

detecting multiple gases. The available gases for each of the

capable sensors is determined by the device connected to the

XNX transmitter.

Figure 79. Gas Selection Menu

After selecting Gas Selection, the initial screen displays the

current target gas. Select

✓

to display the list of available gases

fortheconguredsensor.Usethe switches to scroll through

the list. A sample of the list is shown in Figure 81.

Figure 80. Available Target Gas List

Use

✓

to select the new gas or

✖

to discard the selection, retain

the previously selected gas, and return to the previous menu.

Loading ...

XNX Universal Transmitter Technical Manual - Page 62