Loading ...
Loading ...
Loading ...
CAMSHAFT
EM-87
[VQ35DE]
C
D
E
F
G
H
I
J
K
L
M
A
EM
Revision: 2004 November 2004 FX35/FX45
INSTALLATION
1. Install secondary chain tensioners on both sides of cylinder
head.
● Install chain tensioner with its stopper pin attached.
● Install tensioner with sliding part facing downward on right-
side cylinder head, and with sliding part facing upward on left-
side cylinder head.
● Install new O-ring as shown in the figure.
2. Install valve lifter.
● Install it in the original position.
3. Install camshafts.
● Install camshaft with dowel pin attached to its front end face
on exhaust side.
● Follow your identification marks made during removal, or fol-
low the identification marks that are present on new cam-
shafts for proper placement and direction.
● Install camshaft so that dowel pin hole and dowel pin on front
end face are positioned as shown in figure. (No. 1 cylinder
TDC on its compression stroke)
NOTE:
Large- and small-pin holes are located on front end face of
intake camshaft, at intervals of 180°. Face small dia. side pin
hole upward (in cylinder head upper face direction).
SBIA0499E
KBIA1071E
Bank INT/EXH Dowel pin
Paint marks
Identification
mark
M1 M2
Right
INT No Pink No RE
EXH Yes No Orange RE
Left
INT No Pink No LH
EXH Yes No Orange LH KBIA1009E
KBIA1072E
Loading ...
Loading ...
Loading ...