Loading ...
Loading ...
Loading ...
TIMING CHAIN
EM-201
[VK45DE]
C
D
E
F
G
H
I
J
K
L
M
A
EM
Revision: 2004 November 2004 FX35/FX45
INSPECTION AFTER REMOVAL
Timing Chain
Check tor cracks and any excessive wear at the roller links and link
plates. Replace timing chain as necessary.
INSTALLATION
NOTE:
● The above figure shows the relationship between the mating mark on each timing chain and that on the
corresponding sprocket, with the components installed.
● Parts with an identification mark (R or L) should be installed on the corresponding bank according to the
mark.
Parts with an identification mark:
– Camshaft sprocket (INT)
– Dowel pin groove of camshaft sprocket (EXH) (camshaft sprocket is same part both banks)
– Chain tension guide
– Chain slack guide
● Because of parallel manufacture, there are two types of mark (link colors) for timing chain.
● To install timing chain and related parts, start with those on right bank. The procedure for installing parts
on left bank is omitted because it is the same as that for installation on right bank.
PBIC0282E
PBIC2344E
Loading ...
Loading ...
Loading ...