Loading ...
Loading ...
Loading ...
EM-136
[VQ35DE]
CYLINDER BLOCK
Revision: 2004 November 2004 FX35/FX45
Inspection After Disassembly ABS004XJ
CRANKSHAFT END PLAY
● Using a dial gauge, measure the clearance between thrust bear-
ings and crankshaft arm when crankshaft is moved fully forward
or backward.
● If the measured value exceeds the limit, replace thrust bearings,
and measure again. If it still exceeds the limit, replace crank-
shaft also.
CONNECTING ROD SIDE CLEARANCE
● Measure side clearance between connecting rod and crankshaft
arm with feeler gauge.
● If the measured value exceeds the limit, replace connecting rod,
and measure again. If it still exceeds the limit, replace crank-
shaft also.
PISTON TO PISTON PIN OIL CLEARANCE
Piston Pin Hole Diameter
Measure the hole diameter of piston pin hole with an inside
micrometer.
Piston Pin Outer Diameter
Measure outer diameter of piston pin with a micrometer.
Standard : 0.10 - 0.25 mm (0.0039 - 0.0098 in)
Limit : 0.30 mm (0.0118 in)
EMQ0196D
Standard : 0.20 - 0.35 mm (0.0079 - 0.0138 in)
Limit : 0.40 mm (0.0157 in)
PBIC0815E
Standard : 21.993 - 22.005 mm (0.8659 - 0.8663 in)
PBIC0116E
Standard : 21.989 - 22.001 mm (0.8657 - 0.8662 in)
PBIC0117E
Loading ...
Loading ...
Loading ...