Loading ...
Loading ...
Loading ...
TIMING CHAIN
EM-203
[VK45DE]
C
D
E
F
G
H
I
J
K
L
M
A
EM
Revision: 2004 November 2004 FX35/FX45
4. Install timing chains and related parts.
● Align the mating mark on each sprocket and timing chain for installation.
CAUTION:
For the above reason, after the mating marks are aligned, keep them aligned by holding them
with a hand.
NOTE:
Before installing chain tensioner, it is possible to change the position of mating mark on timing chain for
that on each sprocket for alignment.
● Install slack guides and tension guides onto correct side by checking with identification mark on sur-
face.
● Install chain tensioner with plunger fixed as described in its removal.
CAUTION:
● Before and after the installation of chain tensioner, make sure that the mating mark on timing
chain is not out of alignment.
● After installing chain tensioner, remove stopper pin to release tensioner. Make sure tensioner
is released.
● To avoid chain-link skipping of timing chain, do not move crankshaft or camshafts until front
cover is installed.
5. Perform the same procedure as for right bank, install timing chain and related parts on left side.
6. Install oil pump. Refer to LU-31, "
OIL PUMP" .
PBIC2344E
Loading ...
Loading ...
Loading ...