Loading ...
Loading ...
Loading ...
EM-130
[VQ35DE]
CYLINDER BLOCK
Revision: 2004 November 2004 FX35/FX45
19. Install rear oil seal retainer to cylinder block.
● Apply new engine oil to the oil and dust seal lips.
● Apply liquid gasket to rear oil seal retainer using tube presser
[SST: WS39930000 ( - )] as shown in the figure.
Use Genuine RTV Silicone Sealant or equivalent. Refer to
GI-48, "
RECOMMENDED CHEMICAL PRODUCTS AND
SEALANTS" .
CAUTION:
Replace with the new parts.
NOTE:
Rear oil seal with rear oil seal retainer.
20. Install pilot converter using suitable tool.
● Outer diameter of drift.
● Press-fit pilot converter with its chamfer facing crankshaft as
shown in the figure.
21. Install drive plate.
● Install drive plate and reinforcement plate as shown in figure.
● Secure crankshaft using a ring gear stopper [SST:
KV1011770 (J44716)].
● Tighten the installation bolts crosswise over several times.
PBIC0922E
Pilot converter : Approx. 33 mm (1.30 in)
PBIC0899E
SEM537E
PBIC0910E
Loading ...
Loading ...
Loading ...