Loading ...
Loading ...
Loading ...
Slide the lug wrench through the clip ⇒Fig.193 and pull the wheel cover off in the direction of the
arrow.
Installing the wheel cover
Align the valve cutout with the valve and press the wheel cover onto the wheel rim.
Make sure that the wheel cover is latched onto the rim along the entire circumference.
WARNING
Unsuitable wheel covers and improper installation of wheel covers can cause accidents and se‐
vere injuries.
Improperly installed wheel covers can come loose while driving and endanger other motorists
and cyclists.
Do not use damaged wheel covers.
Always make sure that the flow of air for brake system cooling is not blocked or reduced be‐
fore installing wheel covers. This applies to both factory-installed wheel covers and aftermar‐
ket wheel covers. Insufficient air supply may significantly increase stopping distance.
NOTE
To help prevent damage to the vehicle, be careful when removing wheel covers and be sure to
install them properly.
Wheel bolt caps
Fig.194Pulling cover caps off wheel bolts.
Loading ...
Loading ...
Loading ...