Loading ...
Loading ...
Loading ...
Depending on equipment, unfold the key bit from the remote control vehicle key ⇒Vehicle key set
or remove the emergency key ⇒Emergency key .
Insert the key bit from below into the opening of the cover cap on the driver door ⇒Fig.59 (ar‐
row) and lift the cover cap off. Grasping the door handle and pulling slightly makes it easier to re‐
move the cap.
Insert the key bit into the lock cylinder of the driver door and unlock or lock the door. If the larger
side of the vehicle key touches the door handle during locking or unlocking, either pull the door
handle slightly or reinsert the vehicle key in the lock cylinder with the opposite side facing up.
Reinsert the cover cap from top to bottom and press until it clicks into place. Grasping the door
handle and pulling slightly makes it easier to reinstall the cap.
Keyless Access ⇒Unlocking or locking the vehicle with Keyless Access is not activated if the vehicle
is locked manually.
Special considerations when unlocking manually
If the vehicle is equipped with an anti-theft alarm system, the alarm will sound when the driver
door is opened ⇒Doors and power locking system .
Switch on the ignition to switch off the alarm.
The electronic immobilizer recognizes a valid remote control vehicle key when the ignition is switched
on and deactivates the anti-theft alarm system.
The driver door can be unlocked separately from the inside the vehicle by pulling the door handle
to open the door.
The anti-theft alarm system, when installed, is not activated when the vehicle is locked manually
with the key bit ⇒Anti-theft alarm system .
Manually locking the passenger doors
Loading ...
Loading ...
Loading ...