Loading ...
Loading ...
Loading ...
Move the turn signal and high beam lever from the center position to the following position
⇒Fig.91 :
High beams switched on.
Operate the headlight flasher or switch off the high beams. The headlight flasher turns on the
high beams as long as the lever is pulled and manually held in the pulled position.
When the high beams or headlight flasher is switched on, the blue indicator light in the instrument
cluster lights up.
High-beam control (Light Assist)
Your vehicle may be equipped with the Light Assist automatic high beam control system ⇒High-beam
control (Light Assist) .
WARNING
Improper use of high beams can distract and blind others, causing accidents and serious injuries.
High-beam control (Light Assist)
Your vehicle may be equipped with the Light Assist automatic high beam control system.
Light Assist high beam control
Light Assist generally detects well-lit areas such as towns and switches the high beam headlights off
when driving through these areas.
Light assist switches the high beam headlights on at speeds above about 37mph (60km/h), depend‐
ing on the surroundings and traffic conditions, and off again at speeds below about 18mph (30km/h),
within the limits of the system. ⇒ . The system is controlled by a camera mounted in the rearview
mirror base.
Switching Light Assist on
Switch the ignition on and turn the light switch to the position ⇒Switching lights on and off .
Push the turn signal lever forward (out of the home position) ⇒Switching high beams on and off .
When Light Assist is switched on, the indicator light appears in the instrument cluster display.
Switching Light Assist off
Loading ...
Loading ...
Loading ...