Loading ...
Loading ...
Loading ...
All doors, the engine hood, and the trunk lid must be completely closed and locked.
The vehicle battery must be charged Vehicle battery.
The yellow engine Malfunction Indicator Light (MIL) must not have come on before the engine
was last switched off. Engine control and emission control system.
The remote start feature will not work if the yellow indicator light (MIL) comes on during a
remote start.
Using the remote start feature
Press the button on the remote control vehicle key 1 time ⇒Fig.110③ .
Within the next three seconds, press the button twice in a row ⇒Fig.110④ .
The turn signals flash each time you press a button and the parking lights turn on while the vehicle is
in remote start mode. When you open the driver door while the vehicle is in remote start mode, cer‐
tain warning and indicator lights come on, and a driver information message appears in the instru‐
ment cluster display.
If the remote start feature is not interrupted, the engine will run for about 10 minutes. A maximum of 2
remote starts in a row are possible, regardless of how long each one is allowed to run.
To be able to run 2 remote starts again, you must switch the ignition on and then off again ⇒Starting
and stopping the engine . All the remote start requirements must be met.
Climate control settings with remote start
The following climate control settings are automatically applied during remote start, unless you
change them from the controls inside the vehicle during a remote start.
Function activated Automatic setting
Seat ventilation (if equipped) Level 2, turns on at temperatures about +68 °F (+20 °C)
Seat heating (if equipped) Level 2, turns on at temperatures below +59 °F (+15 °C)
Outside mirror heating Turns on at temperatures below +68 °F (+20 °C)
Loading ...
Loading ...
Loading ...