Loading ...
Loading ...
Loading ...
Releasing
Loosen the tension on the hook-on connector straps following the child restraint manufacturer's
instructions.
Release the top tether strap (if one is required by the child restraint manufacturer or by law).
Depress the spring catch on the hook.
Hold the spring catch in the depressed position.
Move the hook in the direction of the vehicle floor so that there is enough space to release the
connector from the lower anchorage.
You must take special precautions when installing a child restraint with the vehicle safety belt or with
LATCH/UAS lower universal anchorages on the rear seats. Always route the unused center seat
safety belt and the unused safety belt for the seating position where the LATCH/UAS child restraint is
being installed around the rear head restraint behind the child restraint to help prevent a child from
playing with the unused belt and becoming entangled in it.
WARNING
Improper use of the LATCH/UAS system can increase the risk of serious personal injury and
death in an accident.
Always carefully follow the child restraint manufacturer's instructions for proper installation of
the child restraints and proper use of tether straps as well as the LATCH/UAS lower universal
anchorages or safety belts in your vehicle.
Never mount twochild restraint systems on oneLATCH/UAS lower universal anchorage point.
These anchors were developed only for child restraints using the LATCH/UAS system.
Never attach other child restraints, belts, luggage or other things to the LATCH/UAS
anchorages.
Always make sure that you hear a click when latching the seat in place. If you do not hear a
click, the seat is not secure and could fly forward and hit the interior of the vehicle or be
ejected from the vehicle.
NOTE
A child restraint may damage the seat upholstery or the safety belt buckles if installed improperly
or left on the seat when not in use.
Loading ...
Loading ...
Loading ...