Loading ...
Loading ...
Loading ...
Pull and hold the switch ⇒Fig.131 until the yellow indicator light in the switch comes on.
The parking brake is engaged when the yellow indicator light in the switch ⇒Fig.131 (arrow) and
the red indicator light or in the instrument cluster light up.
Releasing the electronic parking brake
Switch the ignition on.
Depress the brake pedal firmly and press the switch ⇒Fig.131 .
OR: If the engine is running, press the accelerator pedal lightly without pressing the brake pedal.
The parking brake is released when the yellow indicator light in the switch ⇒Fig.131 (arrow) and
the red indicator light in the instrument cluster ⇒Warning and indicator lights go out.
Automatic electronic parking brake release when you start driving
The electronic parking brake releases automatically when you start driving if the driver door is closed.
Using the electronic parking brake when starting on a hill or with a heavier load.
You can prevent the electronic parking brake from switching off automatically by pulling and holding
the switch while pulling away.
The electronic parking brake is only switched off after you let go of the switch.
This makes it easier to start off with a heavier load on a trailer.
Automatic electronic parking brake activation when the driver leaves the vehicle
The electronic parking brake can automatically switch on when the driver leaves the vehicle to help
prevent the vehicle from moving if the system detects that it is necessary.
Emergency braking feature
Only use the emergency braking feature in an emergency, when you cannot stop the vehicle using
the brake pedal ⇒ !
Pull and hold the switch ⇒Fig.131 to brake the vehicle hard. An audible warning signal will
sound at the same time.
WARNING
Improper use of the electronic parking brake can cause accidents and severe injuries.
Loading ...
Loading ...
Loading ...