Loading ...
Loading ...
Loading ...
The yellow indicator light comes on in the instrument cluster.
If the system is not responding as expected
The sensors are dirty ⇒Exterior care and cleaning . The sensors may not work properly if blocked
by dirt and snow or residue from abrasive cleaning agents or coatings.
The system requirements are not met ⇒Requirements .
The sensors are covered by water.
The cameras have been damaged or misaligned in low speed impacts or parking maneuvers.
A sensor area has been repainted or structural modifications have been made.
The system function is impaired by an aftermarket component such as a bicycle rack.
The sensors may not detect people and objects due to noise interference from rough roads, cob‐
blestones, other vehicles, and the surrounding area.
A wheel has been changed and wheel dimensions are now different.
There is a sharp curve in the road where you wish to park.
If there is no sensor view, an error message appears, or the system switches itself off
Park Assist switches off automatically if a sensor fails.
Clean the sensors or remove stickers or accessories from the sensors ⇒Exterior care and clean‐
ing .
Check for any visible damage.
Possible solutions
Switch the system off temporarily.
Check whether any of the causes described in this section apply.
If wheel dimensions have been changed, new wheel dimensions need to be synchronized with the
system. See your authorized Volkswagen dealer or authorized Volkswagen Service Facility for
assistance.
After checking all the possible causes and making the necessary adjustments, switch the system
back on.
If the system still does not respond as expected, have it checked by an authorized Volkswagen
dealer or an authorized Volkswagen Service Facility.
Loading ...
Loading ...
Loading ...