Loading ...
Loading ...
Loading ...
In vehicles with a factory-installed trailer hitch: the trailer support feature can be used when approach‐
ing a trailer you wish to tow. This mode uses a high zoom to display the area immediately behind the
vehicle. Obstacles behind the vehicle appear in the field of view later than in other modes. You must
therefore pay very close attention.
The semi-circular green and red lines indicate the distance from the towing hitch.
Red line: The horizontal red line shown on the screen is level with the towing hitch. The distance
from the vehicle is about 1.3 feet (0.4 m).
Green semi-circle: The distance from the vehicle. The distance between each semi-circle is approxi‐
mately 4 in (10 cm).
Orange line: The predicted path of the towing hitch, depending on the steering angle.
Off-road support (mode 3)
In vehicles without a factory-installed trailer hitch: The off-road support mode can be used when driv‐
ing off-road, for example, when backing up. This mode uses a high zoom to display the area immedi‐
ately behind the vehicle. The horizontal red line shown on the screen is level with the rear of the vehi‐
cle. The distance between the vehicle and the red line is about 1.3 feet (0.4 m).
Cross-traffic
This mode displays a wide angle view of the area behind the vehicle. Cross-traffic mode helps the
driver to monitor traffic behind the vehicle and can be used in situations such as backing out of a
garage or pulling out of a narrow parking space.
The orientation lines are displayed independent of the area around the vehicle. There is no auto‐
matic detection of obstacles. The driver is responsible for deciding if the vehicle fits into the park‐
ing spot.
Requirements
Read and follow the introductory information and safety information first⇒ Introduction to the
subject
The following requirements must be met for parking while using the Rear View Camera system:
Loading ...
Loading ...
Loading ...