Loading ...
Loading ...
Loading ...
Press the button in the open trunk lid ⇒Fig.66 ⇒ .
OR: Pull up and hold the switch in the driver door until the trunk lid is completely closed. The
ignition must be switched on.
For vehicles with Keyless Access: Press the or button in the remote control vehicle key.
You must be within sensor range ⇒Fig.55 behind the vehicle for the trunk lid to close. If you are
not behind the vehicle, the turn signals will flash, but the trunk lid will not close.
For vehicles with Keyless Access: If you close the trunk lid after the vehicle is locked, but the vehi‐
cle key you just used is still inside the vehicle, the trunk lid will not fully close and all turn signals
flash four times. If you then close the trunk lid by hand, the vehicle will not lock immediately. All
emergency flashers blink four times.
OR: Pull down on the handle on the inside of the trunk lid ⇒Fig.65 . The trunk lid will then close
by itself ⇒ .
Stopping the trunk lid opening or closing process
The opening and closing of the trunk lid can be stopped as follows:
Press the or button on the remote control vehicle key or the button on the trunk lid,
or pull the switch in the driver door while the trunk lid is opening or closing.
Pressing the or button on the remote control vehicle key or the button on the trunk
lid, or pulling the switch in the driver door again makes the trunk lid fully open or close.
Warning chime
A warning chime sounds when the trunk lid is opened or closed from inside the vehicle or by using the
remote control vehicle key.
Saving the opening angle
If space behind or above the vehicle is limited, you can change the opening angle.
Stop the opening process at the desired opening angle.
Press the button in the open trunk lid ⇒Fig.66 until the emergency flashers blink and a
chime sounds.
The new opening angle is changed and saved ⇒ .
Resetting the opening angle
To completely open the trunk lid again, you must reset the original angle.
Loading ...
Loading ...
Loading ...