Loading ...
Loading ...
Loading ...
Check regularly that the child restraint has not shifted and come into contact with any of the safety
belt buckles.
Check regularly that the safety belt buckles have not been damaged in any way.
As additional help in preventing damage to the safety belt buckles, a protective cover for the safety
belt buckles will be available from an authorized Volkswagen dealer or authorized Volkswagen
Service Facility. Whenever a child restraint will be installed on the center seating position either with
LATCH/UAS lower universal anchorages or with the vehicle safety belt, a protective cover should be
attached to any safety belt buckles that may come in contact with the installed child restraint.
Attach the protective cover to any unused safety belt buckles which might come in contact with
the child restraint before installing a child restraint on the center seating position.
Place the protective cover on top of the safety belt buckle, and push it in until you hear it latch
securely.
Pull on the protective cover to make sure that it is securely latched in the buckle.
Insert the safety belt tongue into the slit in the protective cover and press the buckle release but‐
ton below ⇒Fig.38 . The protective cover is ejected.
When a protective cover is attached to a safety belt buckle, that buckle cannot be used with the
safety belt. Remove the protective cover before allowing someone to use that seating position.
WARNING
A child in a child restraint installed with the LATCH/UAS lower universal anchorages or with the
standard safety belt on the rear seat may play with unused rear seat safety belts and become en‐
tangled, resulting in serious personal injury and even death.
Always secure unused rear seat safety belts out of the reach of children in child restraints such
as by properly routing them around the head restraint adjacent to the seating position where
the child restraint is installed.
NOTE
The outboard safety belts may become damaged if they are secured improperly.
Be careful not to activate the switchable locking retractor when routing the unused safety belt
around the head restraint. Otherwise it will be very difficult to wind the safety belt back into its
normal position.
Loading ...
Loading ...
Loading ...