Loading ...
Loading ...
Loading ...
Remove the guide fixtures from the anchorage points when there is no child restraint secured
in the vehicle anchorage points.
Always remove the guide fixtures from the anchorage points before folding the backrest on the
second row seats forward.
When installing, make sure that the child restraint does not contact or push up against any
safety belt buckles, because this can cause damage to the buckles and make the buckles un‐
usable or unsafe.
Be careful not to activate the switchable locking retractor when routing the safety belts around the
head restraints. Only pull the safety belt out far enough to allow you to route the belt around the
head restraint.
Securing a child restraint with the Top Tether strap
Fig.44Example of an attached upper tether strap. The top tether strap reduces the forward move‐
ment of the child restraint in a crash. This helps to reduce the risk of head injury.
Loading ...
Loading ...
Loading ...