Loading ...
Loading ...
Loading ...
Automatic PDC activation when driving forward only works when the speed falls below about 10mph
(15km/h) when driving slowly toward an obstacle in front of the vehicle. Automatic PDC activation
when driving forward can be turned on or off in the Infotainment system ⇒Infotainment system oper‐
ation and displays .
Automatic activation only happens once. Reactivate the PDC with one of the following actions when
the ignition is switched on:
Press the or button.
Switch the ignition off and back on again.
Move the selector lever to park (P) and then to reverse (R).
Switch the electronic parking brake on and off again.
Maneuver braking
The maneuver braking feature can help the driver by braking automatically when the vehicle is back‐
ing up and an obstacle behind the vehicle is detected.
Depending on vehicle equipment, the maneuver braking feature may also brake automatically when
driving forward if PDC has been switched on manually.
The maneuver braking feature helps prevent collisions only at vehicle speeds lower than 5mph
(10km/h). Maneuver braking is activated or deactivated when PDC is switched on or off. After emer‐
gency braking occurs, the maneuver braking feature is deactivated until you move the selector lever
to another position. The same restrictions that apply to the PDC system also apply to the maneuver
braking feature.
The maneuver braking feature does not switch on if PDC is activated automatically. You must switch
on PDC manually by pressing the or button.
You can also switch maneuver braking on and off by tapping the function key in the PDC display.
Park Distance Control in custom offroad mode
If PDC is switched off in custom offroad mode, acoustic and visual warnings are switched off
⇒4MOTION Active Control . Depending on equipment, the camera image may still be displayed.
Closing the camera image ends all parking functions. PDC will not switch on automatically.
PDC signal chimes and displays
Loading ...
Loading ...
Loading ...