Loading ...
Loading ...
Loading ...
The sensors have been damaged or misaligned in low speed impacts or parking maneuvers.
Damaged or misaligned sensors cannot accurately detect or report objects that might be within
range of the PDC system.
The system function is impaired by an aftermarket component such as a bicycle rack.
A sensor area has been repainted or structural modifications have been made.
The sensors may not detect people and objects due to noise interference from rough roads, cob‐
blestones, other vehicles, and the surrounding area.
If there is no sensor visibility, an error message appears, or the system switches itself off
If an ultrasonic sensor malfunctions, the corresponding sensor area is switched off and cannot be re‐
activated until the malfunction is corrected.
If you hear a long beep of about 3seconds when you first turn PDC on or the indicator light in the
or button starts blinking, there is a malfunction in the Park Distance Control system.
A message may also appear in the instrument cluster display, depending on equipment.
Possible solutions
Switch the system off temporarily.
Check whether any of the causes described in this section apply.
Clean the sensors or remove stickers or accessories from the sensors and cameras ⇒Exterior
care and cleaning .
Check for any visible damage.
After checking all the possible causes and making the necessary adjustments, switch the system
back on.
If the system still does not respond as expected, have it checked by an authorized Volkswagen
dealer or an authorized Volkswagen Service Facility.
Rear View Camera system
Introduction to the subject
In this chapter you will find information on the following subjects:
⇒Switching the Rear View Camera system on and off
Loading ...
Loading ...
Loading ...