Hikvision DS-K1T804BMF Hikvision DS-K1T804BMF User Manual

Loading ...

Exit Buon Type

You can set the exit buon as remaining closed or remaining open. Usually, it is remaining

open.

Door Locked Time

Aer swiping the normal card and relay acon, the mer for locking the door starts working.

Door Open Timeout Alarm

The alarm can be triggered if the door has not been closed in a congured me period. If it is

set as 0, no alarm will be triggered.

Super Password

The specic person can open the door by inpung the super password.

Extended Open Duraon

The door contact can be enabled with appropriate delay aer person with extended access

needs swipes her/his card.

Duress Code

The door can open by inpung the duress code when there is duress. At the same me, the

client can report the duress event.

Dismiss Code

Create a dismiss code which can be used to stop the buzzer of the card reader (by entering

the dismiss code on the keypad).

Note

●

The duress code, super code, and dismiss code should be dierent.

●

The duress code, super password, and the dismiss code should be dierent from the

authencaon password.

●

The length of duress code, super password, and the dismiss code is according the device,

usually it should contains 4 to 8 digits.

Click OK.

Oponal: Click Copy to , and then select the door to copy the parameters in the page to the

selected doors.

Note

The door's status duraon sengs will be copied to the selected door as well.

Congure Parameters for Card Reader

Aer adding the access control device, you can congure its card reader parameters.

Steps

Click Access Control → Advanced Funcon → Device Parameter .

DS-K1T804B Series Fingerprint Access Control Terminal User Manual

Loading ...

Hikvision DS-K1T804BMF Pro Series Fingerprint Terminal