Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/68480921-ds-k1t804bmf/bg25.png)
Figure 7-2 Wi-Fi Page
3.
Enable the Wi-Fi funcon.
4.
Select a Wi-Fi from the list and set the Wi-Fi parameters, including the Wi-Fi password and
DHCP.
-
Enable DHCP, and the system will automacally assign IP address for the Wi-Fi.
-
Disable DHCP, and you should set the IP address, subnet mask, and gateway.
5.
Press ESC and select Yes to save the parameters.
7.4.3 Change
Vericaon Code
You can change the device vericaon code before you add the device to the Hik-Connect mobile
client.
Before You Start
Make sure your device has connected to a network.
Steps
1.
Move the cursor and select Comm. → Mobile-App .
2.
Input a new device
vericaon code in the Vericaon Code.
Result
The device vericaon code is changed. You should input the new vericaon code when you add
the device to the Hik-Connect mobile client.
DS-K1T804B Series Fingerprint Access Control Terminal User Manual
21
Loading ...
Loading ...
Loading ...