Hikvision DS-K1T804BMF Hikvision DS-K1T804BMF User Manual

Loading ...

Click Add and New to save the sengs and connue to add other device.

Oponal: Click on Operaon column to view device status.

8.1.4 Add Device by EHome Account

For access control devices supports EHome 5.0 protocol, you can add them to the client by EHome

protocol aer entering device ID and key, if you have congured their server addresses, port No.,

and device IDs.

Before You Start

Make sure the devices have connected to the network properly.

Steps

Enter Device Management module.

The added devices are displayed on the right panel.

Click Add to open the Add window.

Select EHome as the adding mode.

Enter the required

informaon.

Device Account

Enter the account name registered on EHome protocol.

EHome Key

For EHome 5.0 devices, enter the EHome key if you have set it when conguring network

center parameter for the device.

Note

This funcon should be supported by the device.

Oponal: Check Synchronize Time to synchronize the device me with the PC running the client

aer adding the device to the client.

Oponal: Check Import to Group to create a group by the device name, and import all the

channels of the device to the group.

Finish adding the device.

Click Add to add the device and go back to the device list.

Click Add and New to save the sengs and connue to add other device.

Note

Face pictures cannot be applied to devices added by EHome account.

Oponal: Perform the following operaon(s).

Device Status

Click on Operaon column to view device status.

Edit Device

Informaon

Click on Operaon column to edit the device informaon, such as

device name, device account, and EHome key.

DS-K1T804B Series Fingerprint Access Control Terminal User Manual

Loading ...

Hikvision DS-K1T804BMF Pro Series Fingerprint Terminal