Hikvision DS-K1T804BMF Hikvision DS-K1T804BMF User Manual

Loading ...

Chapter 6 Acvaon

You should acvate the device before the rst login. Aer powering on the device, the system will

switch to Device

Acvaon page.

Acvaon via the device, SADP tool and the client soware are supported.

The default values of the device are as follows:

●

The default IP address: 192.0.0.64

●

The default port No.: 8000

●

The default user name: admin

6.1

Acvate Device via Client Soware

For some devices, you are required to create the password to acvate them before they can be

added to the soware and work properly.

Steps

Note

This funcon should be supported by the device.

Enter the Device Management page.

Click

on the right of Device Management and select Device.

Click Online Device to show the online device area.

The searched online devices are displayed in the list.

Check the device status (shown on Security Level column) and select an

inacve device.

Click

Acvate to open the Acvaon dialog.

Create a password in the password eld, and conrm the password.

Cauon

The password strength of the device can be automacally checked. We highly recommend you

change the password of your own choosing (using a minimum of 8 characters, including at least

three kinds of following categories: upper case leers, lower case leers, numbers, and special

characters) in order to increase the security of your product. And we recommend you change

your password regularly, especially in the high security system, changing the password monthly

or weekly can

beer protect your product.

Proper conguraon of all passwords and other security sengs is the responsibility of the

installer and/or end-user.

Click OK to acvate the device.

DS-K1T804B Series Fingerprint Access Control Terminal User Manual

Loading ...

Hikvision DS-K1T804BMF Pro Series Fingerprint Terminal