Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/68480921-ds-k1t804bmf/bg24.png)
7.4 Communicaon Sengs
Set device network, EHome, Hik-Connect service, etc.
7.4.1 Set Network
You can set the device network parameters, including the IP address, the subnet mask, the gateway
address, and the DHCP.
Steps
1.
Move the cursor and select Comm. → Network .
2.
Press OK to enter the Network page.
3.
Edit the IP address, the subnet mask, and the gateway.
Note
The device's IP address and the PC's should be in the same network segment.
4.
Oponal: Enable DHCP.
The system will automacally assign IP address for the device.
5.
Press ESC and select Yes to save the parameters and return to the previous menu.
7.4.2 Set Wi-Fi Parameters
You can enable the Wi-Fi funcon and you can transmit the data via Wi-Fi.
Steps
Note
The funcon is supported by parts of the device models.
1.
Move the cursor and select Comm. → Wi-Fi .
2.
Press OK to enter the Wi-Fi page.
DS-K1T804B Series Fingerprint Access Control Terminal User Manual
20
Loading ...
Loading ...
Loading ...