Loading ...
Loading ...
Loading ...
Note
●
Press the up or down key on the keypad to change the input method.
●
Up to 64 characters are allowed in the user name.
Card
Set: Swipe card on the card swiping area or enter card No. manually, and select a card
property.
View Info.: View the user's added card
informaon.
Note
●
The card No. is required.
●
Up to 20 digits can be contained in the card No.
●
The card No. can be 0.
●
The card No. can start with 0 when it contains more than one numbers. E.g. 012345.
●
The card No. should be used for once.
●
If device does not support swiping card, you should enter the card No. manually. If you
need to enter the card No. manually, you should enable Press Key to Input Card No.. For
details, see Congure Parameters for Access Control Device .
FP (Fingerprint)
On the Fingerprint page, select a target nger and record according to the voice prompt.
Note
●
The same ngerprint cannot be repeatedly added.
●
Up to 10 ngerprints can be added to one user.
●
You can also scan the ngerprints via the external ngerprint recorder and apply the
ngerprints to the device by the client soware.
●
For detailed
informaon about scanning the ngerprint, see Tips for Scanning Fingerprint .
Dept. (Department)
Select a department in the list and edit the department.
Note
For detailed informaon about eding the department, see .
Plan (Template)
Move the cursor and select Set and select a template from the list.
Note
For details about eding template, see Set Schedule Template .
Auth.
DS-K1T804B Series Fingerprint Access Control Terminal User Manual
18
Loading ...
Loading ...
Loading ...