Hikvision DS-K1T804BMF Hikvision DS-K1T804BMF User Manual

Loading ...

7.10.3 Set System Parameters

Set the system parameters, including the device me format, the keypad sound, the voice prompt,

the volume, the sleeping mode, the

aendance record prompt the authencaon mode, record

delete funcon, and the language.

Steps

Move the cursor and select System → System .

Press OK to enter the System page.

Edit the parameters.

Time Format

Select an appropriate

me format according to your preference.

Keypad Sound

Enable or disable the keypad sound according to your preference.

Voice Prompt

Enable or disable the voice prompt according to your preference.

Voice Volume

Set the device voice prompt volume.

Sleeping

Set the device sleeping waing me (minute). When you are on the inial page and if you set

the sleeping

me to 30 min, the device will sleep aer 30 min without any operaon.

Note

If you set the sleeping me to 0, the device will not enter sleeping mode.

Wait to Logout

If there is no operaon within the congured me, the system will logout.

Record over Threshold Prompt

If the aendance record memory reaches the congured value, the system will pop up a

prompt to remind you. The available value is from 1 to 99.

Note

Up to 50,000 aendance records can be saved.

Auth Mode (Authencaon Mode)

The authencaon mode can be switched among "Card/FP (ngerprint)", "Card", "FP

(ngerprint)", "Card & Password", "Card & FP (ngerprint)", "FP (ngerprint) & Password",

"Card & FP (ngerprint)" & "Password", and "ID (employee ID) and password".

Record Delete

DS-K1T804B Series Fingerprint Access Control Terminal User Manual

Loading ...

Hikvision DS-K1T804BMF Pro Series Fingerprint Terminal