Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/68480921-ds-k1t804bmf/bg23.png)
Select an authencaon mode when verifying user's permission.
Note
●
If you select the authencaon mode as Controller, you should set the authencaon
mode in Set Access Control Parameters . The system will authencate user's identy
according to the congured authencaon mode. By default, the authencaon mode is
Controller. This mode is applicable to edit users'
authencaon modes in batch.
●
If an user needs to use a special
authencaon mode, which is dierent from the
authencaon mode congured in Set Access Control Parameters , he can use card/
ngerprint, card, etc. The system will authencate the user's identy according to the
congured authencaon mode rst. This mode is applicable to edit single user's
authencaon mode, which has special permissions.
Role
Select the user's role as administrator or normal user.
●
Admin: The admin has all permissions to operate the device.
●
User: The normal user can check
aendance on the inial page.
Note
●
All persons can enter the main page by entering the device password to operate if there is
no admin user congured.
●
Aer conguring the admin, you should authencate the admin to enter the main page.
●
You can use the USB interface to import the user
informaon. For details, see Data
Transfer.
3.
Press ESC, and select Yes to save the sengs and exit the page.
7.3 Local Login
Log in the device as an administrator to mange the device parameters, including the
communicaon, the user, the access control parameters, the aendance, the me, the report, the
system, etc.
Hold OK for 3 s to enter the login page. Select FP, Device PWD, or Card, and authencate to enter
the home page.
Note
●
Press the up or down key on the keypad to change the input method.
●
The login page varies depending on dierent device model. When operaon, refer to the actual
device page.
DS-K1T804B Series Fingerprint Access Control Terminal User Manual
19
Loading ...
Loading ...
Loading ...