Loading ...
Loading ...
Loading ...
Before You Start
Add at least one person, and set the person's authencaon mode. For details, see Person
Management .
Steps
1.
Move the cursor and select System →
Aîž©. Status to enter the Aîž©endance Status page.
2.
Move the cursor and select Aîž©endance Mode and set the aîž©endance mode as Manual.
Figure 7-15 Manual Mode
Note
Make sure the aîž©endance status is enabled. By default, it is enabled.
3.
Press ESC and save the aîž©endance mode.
4.
Move the cursor and select Shortcut Key and dene the shortcut key's aendance status.
5.
Press ESC and save the seîž«ngs.
Result
Press a key on the keypad to select an aendance status and authencate. The authencaon will
be marked as the congured aendance status according to the dened shortcut key.
Or when you
authencate on the inial page, you will enter the Select Status page. Select a status
to take aîž©endance.
Note
If you do not select a status for about 20 s, the authencaon will be failed and it will not be
marked as a valid aîž©endance.
DS-K1T804B Series Fingerprint Access Control Terminal User Manual
37
Loading ...
Loading ...
Loading ...