Hikvision DS-K1T804BMF Hikvision DS-K1T804BMF User Manual

Loading ...

Enable NFC Card

If enable the funcon, the device can recognize the NFC card. You can present NFC card on

the device.

Enable M1 Card

If enable the funcon, the device can recognize the M1 card. You can present M1 card on the

device.

Enable EM Card

If enable the

funcon, the device can recognize the EM card. You can present EM card on the

device.

Enable CPU Card

Reserved. If enable the funcon, the device can recognize the CPU card. You can present CPU

card on the device.

Enable ID Card

Reserved. If enable the

funcon, the device can recognize the ID card. You can present ID

card on the device.

Click OK.

Oponal: Click Copy to, and then select the access control device(s) to copy the parameters in

the page to the selected device(s).

Congure

Parameters for Door

Aer adding the access control device, you can congure its access point parameters.

Steps

Click Access Control → Advanced Funcon → Device Parameter .

Select an access control device on the

le panel, and then click to show the doors of the

selected device.

Select a door to show its parameters on the right page.

Edit the door or

oor parameters.

Note

●

The displayed parameters may vary for dierent access control devices.

●

Some of the following parameters are not listed in the Basic Informaon page, click More to

edit the parameters.

Name

Edit the card reader name as desired.

Door Contact

You can set the door sensor as remaining closed or remaining open. Usually, it is remaining

closed.

DS-K1T804B Series Fingerprint Access Control Terminal User Manual

Loading ...

Hikvision DS-K1T804BMF Pro Series Fingerprint Terminal