Loading ...
Loading ...
Loading ...
179
Media
USB
Reference
Factory Restore
In case you want to erase all changes to your Factory and User
data, and restore your Pa300 to the same condition it was when it
was new, you can use the Factory Restore procedure.
War nin g: This command deletes all data from memory (including
your custom data).
1. Select the Factory Restore command, then touch Execute.
2. A dialog box will appear, with a list of types of data to be
restored. Only check the types of data you want to restore.
War ni ng : This command will delete from the internal mem-
ory all types of data selected in this dialog box (including
your custom data).
3. When done, a message appears asking you to restart the
instrument (“Data Restored. Please switch off ”). Set the
instrument to standby mode, then turn it on again.
OS Version Number
This line shows the installed Operating System version. From
time to time, check our web site (
www.korg.com), to see if a
newer, free version has been released.
USB
Use this page to enable or disable the USB Device port for file
transfer.
The USB Device port allows you to access the internal storage
memory from a personal computer, by just connecting the Pa300
to the computer’s USB interface. This way, you can exchange files
between the user-accessible area of the internal storage memory
of the Pa300 (DISK device) and a personal computer.
Note: The drivers supplied in the Accessory Disc are only for MIDI
Over USB connection.
Note: While USB file transfer is enabled, you cannot access other
functions on the Pa300. MIDI Over USB is also disabled.
Wa rni ng : It is not possible to change the label (name) of the inter-
nal disk when Pa300 is connected to a PC through the USB port. If
you try to do it, the original name is restored by Pa300.
Loading ...
Loading ...
Loading ...