Loading ...
Loading ...
1. Safety Rules
Safe Operation Practices for Ride-On Mowers
IMPORTANT: THIS CUI-rlNG MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE
TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.
@
I. Training
Readtheinstruct_nscarefully.Befamiliarwiththecontrols
andtheproperuseoftheequipment.
• Neverallowchildrenorpeopleunfamiliarwiththeinstruc-
tionstousathelawnmower.Localregulationsmayrestrict
theageoftheoperator.
• Nevermowwhilepeople,especiallychildren,orpetsare
nearby.
• Keepinmindthattheoperatoror userisresponsiblefor
accidentsor hazardsoccurringtootherpeople or their
property.
• Do notcarrypassengers.
• Alldriversshouldseekandobtainprofessionaland prac-
ticalinstruction.Suchinstructionshouldemphasize:
- the needfor care and concentrationwhen working
withdde-onmachines;
- controlofa ride-onmachinesliding on a slopewill
notberegainedbythe applicationofthe brake.
The mainreasonsforlessofcontrolare:
a) insufficientwheelgrip;
b) beingdriventoofast;
c) inadequatebraking;
d) thetypeofmachineisunsuitablefor itstask;
e) lack of awareness of the effect of ground
conditions,sspeciallyslopes;
f) incorrecthitchingand loaddistribution.
I1.Preparation
• Whilemowing,alwayswear substential footwear end long
trousers. Do not operate the equipment when barefoot
or wearing open sandals.
• Thoroughly inspectthe area where the equipment is to
be usedand remove all objects which may be thrown by
the machine.
• WARNING - Petrolis highly flammable.
- Store fuel in containers specifically designed for this
purpose.
- Refuel outdoorsonly and do not smoke while refu-
eling.
- Add fuel before starting the engine. Never remove
the cap ofthe fuel tank or add petrol while the engine
isrunningor when the engine is hot.
- If petrol isspilled, do not attempt to start the engine
butmovethe machine away from the area of spillage
and avoid creating any source of ignition until petrol
vaporshave dissipated.
- Replace allfuel tanks and container caps securely.
• Replace faulty silencers.
Before using, always visually inspect to see that the
blades, blade boltsand cutter assembly are not worn or
damaged. Replace worn or damaged blades and bolts
in sets to preserve balance.
On mufti-bladed machines,take care as rotatingone blade
can cause other blades to rotate.
3
III. Operation
Do not operate the engine in a confined space where
dangerous carbon monoxide fumes can collect.
Mow only in daylight or in good artificial light.
Before attempting tostart the engine, disengage all blade
attachment clutches end shift into neutral.
Do not use on slopes of more than 10°.
Remambe rthere isno suchthing as a =safe"slope. Tmvst
ongrass slopes requires particular care. Toguard against
overturning;
o do not stop or start suddenly when going upor down-
hill;
- engage clutch slowly, always keep machine in gear,
especially when traveling downhill;
- machine speeds should be kept low on slopes and
during tight turns;
- stay alert for humps and hollows and other hidden
hazards;
never mow across the face of the slope, unless the
lawnmower is designed for this purpose.
Use care when pulling loads or using heavy equipment.
Use only approved drawbar hitchpoints.
Limit loads to those you can safely control.
Do not turn sharply. Use care when reversing.
Use counterweight(s) or wheel weights when sug-
gested in the instruction handbook.
Watch out for traffic when crossing or near roadways.
Stop the blades from rotating before crossing surfaces
other than grass.
When using any attachments, never direct discharge of
material towardbystanders nor allow anyone near the
machine while in operation.
Never operate the iawnmower with defective guards,
shields or without safety protective devices in place.
Do not change the engine governor settings or overspeed
the engine. Operating the engine at excessive speed may
increase the hazard of personal injury.
Before leaving the operator's position:
- disengage the power take-off and lower the attach-
ments;
- change into neutral and set the parking brake;
- stop the engine and remove the key.
Disengage drive to attachments, stop the engine, and
disconnect the spark plug wire(s) or remove the ignition
key.
- before cleaning blockages or unclogging chute;
- before checking, cleaning or working on the lawn-
mower;
- after striking a foreign object. Inspectthe lawnmower
for damage and make repairs before restarting and
operating the equipment;
if the machine starts to vibrate abnormally (check
immediately).
Disengage drive to attachments when transporting or not
in use.
Stop the engine and disengage drive to attachment
before refueling;
before removing the grass catcher;
before making height adjustment unless adjustment
can be made from the operator's position.
Loading ...
Loading ...
Loading ...