Loading ...
Loading ...
Loading ...
EN
Fiorenzato | Series_00 Ed. 04/2022
15 / 49
Series
EN
4.2 Choosing the installation location
Given the function of the grinder-doser, it is advisable to PLACE IT close to the coffee
machine.
Before installing the appliance, please also ensure that the installation location meets
the following requirements:
• The surface on which the appliance is to be placed must be fl at, well-levelled and
strong enough to support its weight;
• the available space must be large enough to allow proper installation and easy use
of the appliance;
• the appliance must not be installed near sinks and/or taps, which may cause it to
become wet with jets and/or splashes of water;
• The place of use must be suffi ciently well-lit and well-ventilated;
• Close to the installation position, there must be a socket, which complies with the
regulations in force in the country of use, for connecting the appliance to the mains
power supply.
ATTENTION! The socket must be equipped with an effi cient earthing system.
ATTENTION! The mains power supply must also be equipped with a
thermal-magnetic circuit breaker located upstream of the socket, in a
position known to and easily accessible by the operator in order to protect
the appliance from overloads and voltage fl uctuations and the user from the
risk of electrocution.
4.3 Unpacking and handling the appliance
After opening the packaging, carefully check that the appliance is intact and that there
are no damaged parts.
• Open the packaging near the point of installation, ensuring that there is enough
space to handle the appliance safely.
• Take the appliance out of its packaging, holding it fi rmly and securely.
• Place the grinder-doser on the worktop.
ATTENTION! Take extreme care when handling the appliance. Its weight
(18 ÷ 25 kg) and the particular rounded shape of the machine body may
lead to the risk of slipping and loss of grip, with possible falling and bruising/
crushing of the feet when lifting and/or of the hands when positioning the
appliance on the worktop. If you are not sure you have a secure grip, it is
advisable to ask another person to help.
ATTENTION! Packaging parts must not be left within the reach of children
as they are a potential source of danger. Keep the packaging until the
warranty expires.
Fiorenzato | Series_00 Ed. 04/2022
16 / 49
EN
Series
4.4 Installation and mains connection
To complete installation and start using your new coffee grinder-doser, all you need to
do is:
• Ensure that the voltage of the mains power supply meets the required power
requirements and that the electrical rating of the system is adequate to support the
power absorbed by the appliance (see product identifi cation label on the side of the
grinder-doser).
• Put the power cable plug (Fig. 8 Part 1) into the IEC connector on the bottom of the
appliance (Fig. 8 Part 2);
ATTENTION! To connect the power plug of the grinder-doser to the socket,
it is necessary to tilt it completely and place it on one side. Hold the appliance
fi rmly and handle it carefully, taking care not to damage it and not to crush
your hands or fi ngers.
If it is necessary to use power adapters, power strips or extension cables,
it is mandatory to use products that comply with the certifi cation standards in
force in the country of use.
• Put the grinder-doser back into the upright position and then connect the cable to
the power socket provided (Fig. 9).
• If present, set the thermal-magnetic circuit breaker located upstream of the power
socket to the “ON” position (Fig. 10).
• Turn the machine power switch to the “I” position (see Part 5.1.1).
1
2
ON
OFF
Fig. 8 Fig. 9 Fig. 10
The grinder-doser is now powered and ready for use.
Loading ...
Loading ...
Loading ...