Loading ...
Loading ...
Loading ...
EN
Fiorenzato | Series_00 Ed. 04/2022
1 / 49
Series
EN
1 GENERAL INFORMATION 5
1.1 General information on the manual and how to consult it 5
1.2 Symbols used in the manual 5
1.3 Warnings for the buyer 6
1.4 Manufacturer’s contact details 6
1.5 Instructions for requesting assistance 6
1.6 Warranty 7
1.7 Applicable directives 7
2 IDENTIFICATION DATA AND TECHNICAL SPECIFICATIONS 8
2.1 Introduction 8
2.2 Appliance identifi cation 8
2.3 Identifi cation of the main parts of the grinder-doser 9
2.4 Intended use 10
2.5 The models in the
line and technical specifi cations 10
2.6 Noise level 12
3 SAFETY 12
3.1 General information 12
3.2 Reasonably foreseeable misuse 12
3.3 Precautions for proper and safe use 13
3.4 Safety devices on the grinder-doser 14
3.5 Residual risks 15
3.6 Warning labels attached to the machine 16
4 INSTALLATION 16
4.1 Storage 16
4.2 Choosing the installation location 17
4.3 Unpacking and handling the appliance 17
4.4 Installation and mains connection 18
5 USING THE GRINDER-DOSER 19
5.1 Machine controls 19
5.1.1 Switch 19
5.2 Preparing to use the grinder-doser 20
5.3 “Initial start-up” procedure 21
5.4 Operator control panel 23
5.4.1 Home page 24
5.4.2 Disabling/Enabling the
automatic weighing system 27
5.4.2.1 Disabling the
automatic weighing system 27
5.4.2.2 Activation of the
automatic weighing system 27
5.4.3 Settings Menu 28
Fiorenzato | Series_00 Ed. 04/2022
2 / 49
EN
Series
5.4.3.1 Change grinding weights 30
5.4.3.2 Dose weight display 30
5.4.3.3 Change dose times 31
5.4.3.4 Grinding time display 31
5.4.3.5 Show statistics 32
5.4.3.6 Triple dose display 32
5.4.3.7 XGi System 33
5.4.3.8 Initial start-up 33
5.4.3.9 Display brightness 33
5.4.3.10 Screen appearance 34
5.4.3.11 Screensaver 35
5.4.3.12 Language 35
5.4.3.13 Date and time 36
5.4.3.14 Information 36
5.4.3.15 Resetting dose weights 37
5.4.3.16 Administrator password 38
5.5 Adjusting the degree of grinding 39
5.6
system auto-calibration 39
5.7 Dispensing doses 40
6 GRINDER-DOSER MAINTENANCE 41
6.1 Routine maintenance 41
6.1.1 Cleaning the appliance 42
6.1.2 Checking the power cable status 44
6.1.3 Thoroughly cleaning the grinding blades 45
6.1.4 Shutting down the grinder-doser 45
6.1.5 Replacing the grinding blades 46
6.2 Supplementary maintenance 46
7 ANOMALIES - CAUSES - REMEDIES 47
8 REQUESTING SPARE PARTS 51
Loading ...
Loading ...
Loading ...