Loading ...
Loading ...
Loading ...
Note:
1. The forward delay parameter and the network diameter are correlated. A too small forward
delay parameter may result in temporary loops. A too large forward delay may cause a
network unable to resume the normal state in time. The default value is recommended.
2. An adequate hello time parameter can enable the switch to discover the link failures
occurred in the network without occupying too much network resources. A too large hello
time parameter may result in normal links being regarded as invalid when packets drop
occurred in the links, which in turn result in spanning tree being regenerated. A too small
hello time parameter may result in duplicated configuration being sent frequently, which
increases the network load of the switches and wastes network resources. The default
value is recommended.
3. A too small max age parameter may result in the switches regenerating spanning trees
frequently and cause network congestions to be falsely regarded as link problems. A too
large max age parameter result in the switches unable to find the link problems in time,
which in turn handicaps spanning trees being regenerated in time and makes the network
less adaptive. The default value is recommended.
4. If the TxHold Count parameter is too large, the number of MSTP packets being sent in each
hello time may be increased with occupying too much network resources. The default
value is recommended.
7.1.2 STP Summary
On this page you can view the related parameters for Spanning Tree function.
Choose the menu Spanning Tree→STP Config→STP Summary to load the following page.
77
Loading ...
Loading ...
Loading ...