Loading ...
Loading ...
Loading ...
D-MAC:
Enter the destination MAC address contained in the rule.
MASK:
Enter MAC address mask. If it is set to 1, it must strictly match the
address.
11.1.4 Standard-IP ACL
Standard-IP ACLs analyze and process data packets based on a series of match conditions,
which can be the source IP addresses and destination IP addresses carried in the packets.
Choose the menu ACL→ACL Config→Standard-IP ACL to load the following page.
Figure 11-4 Create Standard-IP Rule
The following entries are displayed on this screen:
Create Standard-IP ACL
ACL ID:
Select the desired Standard-IP ACL for configuration.
Rule ID:
Enter the rule ID.
Operation:
Select the operation for the switch to process packets which match
the rules.
Permit: Forward packets.
Deny: Discard Packets.
S-IP:
Enter the source IP address contained in the rule.
D-IP:
Enter the destination IP address contained in the rule.
Mask:
Enter IP address mask. If it is set to 1, it must strictly match the
address.
11.1.5 Extend-IP ACL
Extend-IP ACLs analyze and process data packets based on a series of match conditions,
which can be the source IP addresses, destination IP addresses, IP protocol and other
information of this sort carried in the packets.
Choose the menu ACL→ACL Config→Extend-IP ACL to load the following page.
137
Loading ...
Loading ...
Loading ...